Cast Iron Pro

For Chevy Impala 94-96 Baer Pro Plus Drilled & Slotted Rear Brake System

For Chevy Impala 94-96 Baer Pro Plus Drilled & Slotted Rear Brake System
For Chevy Impala 94-96 Baer Pro Plus Drilled & Slotted Rear Brake System

For Chevy Impala 94-96 Baer Pro Plus Drilled & Slotted Rear Brake System

For Chevy Impala 94-96 Baer Pro Plus Drilled & Slotted Rear Brake System. On the go Daily Deals. Pro Plus Drilled and Slotted Rear Brake System (4302487R) by BaerĀ®. The Pro Plus series contains all the features and benefits of the Extreme Plus kits for vehicles with less clearance room for brake components.

The kit includes 6-piston rear monoblock calipers finished in a protective ceramic powder coat that is extremely resistant to grime, brake dust, and chips. Also included are lightweight two-piece rotors, stainless steel caliper hardware, and pre-loaded ceramic brake pads. Available in configurations for C-clip axles, all Pro Plus brake components are designed to provide optimum levels of progressive braking during aggressive street and track driving. System incorporates Baers unique Verislide design allowing the calipers to float with the factory c-clip axles. Wheel template is required to be used before ordering.

Minimum Wheel Diameter Required: 457.2mm (18). Driving Style: Performance / Racing, Track Only, Hauling & Towing. Rotor Style: Drilled & Slotted. Rear calipers are a 1-piece design forged from a solid block of aluminum.

Rear calipers feature the only street application with a 6-piston design for better braking performance. Calipers come pre-loaded with ceramic brake pads that offer superior heat disbursement, longer life, quieter operation, and lower dust levels.

Calipers are radially mounted to maintain greater stiffness under load - ensuring pads stay in alignment with the rotor and make a more even, superior level of contact. Calipers feature stainless steel pistons, caliper attachment brackets, and vibration dampening springs to ensure freedom from corrosion deterioration.

Pistons within each caliper are staggered in size to minimize pad taper and uneven pad wear. Kit comes with 2-piece rotors that are slotted and drilled for better venting of heat, water, brake dust, and gasses. Brake pads feature racing grade backing plates that more effectively prevent heat buildup that causes brake fluid boiling as well as damage to caliper seals and dust boots. Kits for vehicles with C-clip style rear axles come with a specially designed Verislide self-centering brake caliper bracket. Rotors are dipped in zinc to resist corrosion on non-contact areas. Proudly manufactured in the United States. Stainless braided brake hoses and system hardware.

Drilled holes and Slots create an escape route for debris, dust, gases, and water. Slots clean and de-glaze pad surface for optimum pad coefficient of friction.

Drilled rotors improve the appearance of your wheels and provide reduced rotor weight. 2-Piece rotors offer great weight savings and provide rapid heat dissipation compared to 1-piece rotors. Vented type of rotors offer much faster heat dissipation. Multi-piston calipers provide clamping force on both sides of the rotor at the same time and uniformly transfer braking force to the brake pads. Caliper pistons are hollow to save weight.

Aluminum caliper body allows for exceptional light weight (up to 40% of weight savings) and ensures superior corrosion resistance. Fixed calipers create friction from the brake pads on both sides of the rotor at minimum time interval. Baer brakes offers a solution to the woes of underperforming factory brake parts with the Pro Plus Rear Brake System. Designed as the ultimate street/track performance upgrade for vehicles, this kit starts with rear calipers built with six pistons - a design virtually unmatched in the industry. It also includes 2-piece rotors that are cross-drilled and grooved for superior disbursement of heat, brake friction gases, dust, and water - with center sections crafted from aluminum for weight reduction where it counts.

Center sections are crafted from aluminum for weight reduction, and kits for vehicles with C-clip style rear axles come with a specially designed Verislide self-centering brake caliper bracket that mounts to the axle spindle. These rear rotors do not come with parking brake components, but a kit with them is available should you prefer. While the Pro Plus calipers are more powerful than products from most competitors, company engineers design and test them until they achieve the perfect balance of performance and control.

This means using superior materials and designs thoroughly in all areas of construction, not saving pennies where the eye will not notice. For example, calipers are radially mounted to maintain greater stiffness under load - ensuring pads stay in alignment with the rotor and make a more even, superior level of contact. Calipers also feature stainless steel pistons, caliper attachment brackets, and vibration dampening springs to ensure freedom from corrosion deterioration. Pistons within each caliper are staggered in size to minimize pad taper and uneven pad wear, so you'll get more usable brake life out of pads.

Caliper housings feature a durable powder coat finish that is extremely heat resistant, and the ceramic brake pads also feature racing-grade backing plates that more effectively prevent heat buildup. Baer matches the level of racing-grade calipers and rotors with ceramic brake pads that come pre-loaded inside each caliper. Used in championship racing where 200 mile-per-hour speeds quickly generate blistering heat, ceramic brake pads offer the natural ability to stay cool under the most severe conditions. When ceramic brake pads are combined with perforated rotors, heat buildup is reduced so extensively that brake fade rarely occurs due to fluid reaching boiling temperature. Ceramic brake pads are far quieter due to their higher resonant frequency undetectable by human ears, so squealing is not an issue. And finally, ceramic compounds last longer and produce finer, less obtrusive dust that does not stick to most wheel surfaces.

You don't need a high-performance vehicle to enjoy the benefits these brake kits offer, and you might find your new car dealer charging a similar price for OE brakes while giving you less. No matter whether you're doing basic repairs and maintenance, modifying your car's street appeal and performance, or adding high-tech lighting and electronics, our great selection of brand name products and knowledgeable associates will ensure success with all your automotive projects. We offer the finest and widest variety of automotive parts and accessories using state-of-the-art technologies, and employ the most dedicated and creative team members. These individuals focus on exceeding expectations of customers who want the exact component at the best price in the quickest time. Our goal is to provide a WOW experience during every customer interaction.

Whatever you need, whether it's a replacement part to fix a broken down vehicle, a crash part to repair a vehicle from an accident, perhaps a new set of custom wheels and tires, or something to make it flashy or faster, lifted or lowered, we will be your one-stop shop. We fulfill our mission daily with enthusiasm and optimism, learning from our ongoing opportunities and successes. We enjoy a modern yet tricked out work atmosphere while ensuring a true learning environment to develop our people. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts & Accessories\Brakes & Brake Parts\Brake Disc Rotors". The seller is "caridautoparts" and is located in this country: US. This item can be shipped to United States.
  • Brand: Baer
  • Manufacturer Part Number: 4302487R
  • Other Part Number: 1705722606
  • Product Type: Performance Brakes, Pads & Rotors
  • Product SubType: Performance Brake Kits
  • UPC: 844165051688
  • Solid or Vented Rotor: Vented
  • Rotor Style: Drilled, Slotted
  • Rotor Material: Cast Iron
  • Rotor Construction: 2-Piece
  • Outside Diameter: 356mm (14\
  • Driving Style: Hauling & Towing, Track Only, Performance / Racing
  • Caliper Type: 6-Piston
  • Caliper Series: 6P
  • Caliper Construction: Fixed
  • Caliper Color: Red
  • Brakes Location: Rear
  • Brake Kit Type: Big Brake Kits
  • Brand Type: Genuine OEM
  • Series: Pro+
  • Placement on Vehicle: Rear
  • Product Name: Brake System
  • Material: Iron
  • Fitment Type: Performance/Custom
  • Product Details: Performance Big Brake Kit

For Chevy Impala 94-96 Baer Pro Plus Drilled & Slotted Rear Brake System